Toshiba e-Studio 332s User Manual Advanced Download Page 109

Page: 109 / 177

Windows Utilities

- 109 -

Useful Sof

are

Removing a Machine

You can removes a registered machine

Right-click on the machine from

[

Registered Device Table

Select [

Remove device

On the confirmation screen, click on

[

Yes

Check the Status of the Machine.

Check the status and information of the machine.

Select the machine from the

[

Registered Device Table

Select the [

Device Info

] tab.

Memo

When the machine is connected to the network, [

Device

Status

] will be displayed.

If you want to update information, click on [

Update

Device Information

Set the Email Address

With the User Setting plugin, you can register the

machine's email address or edit it.
The following explains some of the functions.

Note

When using the following functions, please install the User
Setting plugin.

Reference

For how to install the plugin, please refer to

"Setup" P. 108

Icon

The meaning of each icon is as shown below.

Exporting Addresses to a File.

Select machine from which to export,

from the [

Registered Device Table

Select the [

User Setting

] tab.

Click on [

E-mail Address Manager

Enter the administrator password and

click [

Click .

Enter the folder name and name of the
folder to be saved to, and click on

[

Save

Note

After exporting, an edited CSV file may not restore
properly.

Importing Addresses from a File.

Select from which device to import, from

[

Registered Device Table

Select the [

User Setting

] tab.

Click on [

E-mail Address Manager

Enter the administrator password and

click [

Click .

Select [

Open

] from [

Select CSV File

Select the file you want to import and

click on [

Open

Click on [

Next

Select the settings to import and click

[

Import

Click .

Memo

CSV files exported by Outlook Express (Windows email and
Windows Live email) can also be restored.

Icon

Details

Registers a new email
address.

Registers a new email
address group.

Saves settings on the
machine.

Deletes the selected item.

Deletes the selected item and
moves other items up.

Deletes all items.

Exports current settings to a
file.

Imports settings from a file.

Return to the main page.

Icon

Details

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands