Toro Groundsmaster 7210, Service Manual

Page: 223 / 342

Neutral Switches
g035048
Figure 152
1. Left cover 3. Right cover
2. Bolts
g033649
Figure 153
1. Traction lever (left) 2. Neutral switch
The Groundsmaster 7210 machine uses 2 identical neutral switches. These
neutral switches are normally open and close when the traction levers are in the
N
EUTRAL LOCK
position. The neutral switches are located under the left cover
and right cover below the operator seat ( Figure 152 and Figure 153 ).
The Standard Control Module (SCM) monitors the status of the neutral switches.
If the key switch is in the O
N
position and the 2 traction levers are in the N
EUTRAL
LOCK
position, the SCM Neutral input LED should be illuminated. The switches
are connected in series so that the 2 switches must be closed for the neutral
input to be completed for the SCM.
Testing the Neutral Switches
1. Before you disconnect a neutral switch for testing, ensure that you test the
switch and its circuit wiring as a SCM input; refer to Standard Control Module
(page 5–3) .
Groundsmaster 7210 Page 5–27 Electrical System: Testing the Electrical Components
16222SL Rev C