Toro Groundsmaster 7210, Service Manual

Page: 143 / 342

Disassembling the Transmission (continued)
31. Remove and discard the O-rings from the plugs.
32. Remove the right and left flushing valve plugs, springs, and valves from the
center case. Note the differences in the flushing valves and their locations for
assembly purposes.
33. Remove and discard the O-rings from the plugs.
g033435
Figure 75
1. Cylinder block assembly 2. Pipe
34. Slide the 2 cylinder block assemblies from the pump shafts. Mark the
positions of the cylinder blocks so that you can assemble them in the same
position.
Note: Ensure that you do not drop the pistons from the cylinder block.
35. Slide the pipe assembly from the bore of the transmission pump housing.
36. Remove and discard the O-rings from the grooves in the pipe.
g033436
Figure 76
1. Oil seal 3. Thrust plate bevel
2. Thrust plate 4. Control arm
37. Remove the retaining ring that secures the PTO shaft oil seal into the housing
bore, and remove the spacer and oil seal from the housing.
Note: Ensure that you do not damage the housing bore.
Groundsmaster 7210 Page 4–83 Hydraulic System: Service and Repairs
16222SL Rev C