Toro Groundsmaster 7210, Service Manual

Page: 163 / 342

Assembling the Transmission (continued)
g033473
Figure 113
1. Accumulator piston 3. Collar hole
2. Accumulator collar 4. Accumulator cover
47. Lubricate the accumulator components with clean hydraulic fluid. Install the
piston, spring, and collar into the pump body.
Note: Ensure that the hole in the collar is toward the outside of the pump
body.
48. Align new gasket to the accumulator cover and secure the cover to the pump
body with the 2 bolts; torque the bolts to 23 to 26 N∙m (17 to 19 ft-lb) .
g033474
Figure 114
1. Charge relief valve 3. Charge relief plug
2. Pressure valve 4. Pressure valve plug
49. Lubricate the charge relief valve and spring with clean hydraulic fluid and
install them into the pump body.
50. Lubricate the pressure valve and spring with clean hydraulic fluid and install
them into the pump body.
51. Lubricate new O-rings and install the O-rings onto the charge relief plug and
pressure valve plug. Install the plugs into the pump body; torque the plugs to
23 to 26 N∙m (17 to 19 ft-lb) .
Groundsmaster 7210 Page 4–103 Hydraulic System: Service and Repairs
16222SL Rev C