Toro Groundsmaster 7210, Service Manual

Page: 211 / 342

Settings Screen (continued)
To get access to the protected menu items, enter the 4 digit pin PIN using the
center and right InfoCenter buttons. After the PIN has been entered, a check
mark should be visible above the center InfoCenter button. Press the center
button and the InfoCenter display screen should indicate “PIN” in the upper
right hand corner if the correct PIN number was entered. Use the back button
to return to the settings menu. The protected menu items should be available
in the service menu and can be changed as long as the key switch remains in
the R
UN
position.
Note: The initial PIN will either be 1234 or 0000. If the PIN has been changed
and is forgotten, you can obtain a temporary PIN from your Toro distributor.
About Screen
g035033
Figure 146
1. About menu 4. Back button
2. Choose menu item 5. About items
3. Move to menu items
The about screen ( Figure 146 ) identifies the machine model number, serial
number, and software revision number. The about screen also lists the CAN-bus
status. Additional information is identified if the about screen is accessed after
the protected menus have been accessed by entering the PIN.
To return to the main menu screen from the about screen, press the back button
(left button).
Groundsmaster 7210 Page 5–15 Electrical System: InfoCenter Display
16222SL Rev C