Inspecting the Oil Cooler (continued)
g035023
Figure 132
1.
Screw (3 each)
5.
Radiator cap
2.
Flat washer (6 each)
6.
Pipe plug
3.
Lock washer (3 each)
7.
Radiator
4.
Nut (3 each)
8.
Oil cooler
2. Use compressed air in the opposite direction of the fluid flow and dry the
interiors of the oil cooler.
3. Install clean plugs on the oil cooler ports. Clean the outer surface of the
cooler.
Note:
The oil cooler must be free from corrosion, cracked tubes, or excessive
pitting of tubes.
Installing the Oil Cooler
1. Install the oil cooler to the radiator with the 3 screws (item 1 in
), 6
flat washers, 3 lock washers, and 3 nuts.
2. Install the radiator and oil cooler to the machine; refer to
.
3. Lower the hood and secure it with the latches.
4. Start the engine and check for leaks.
Groundsmaster 7210
Page 4–135
Hydraulic System: Service and Repairs
16222SL Rev C
Summary of Contents for Groundsmaster 7210
