Toro Groundsmaster 7210, Service Manual

Page: 168 / 342

Installing the Gear Pump (continued)
3. Position the gear pump to the transmission and secure the pump with the
2 bolts and 2 lock washers.
4. Move the hydraulic tank toward the rear of the machine to its proper position
and assemble the tank to the reservoir support; refer to Installing the
Hydraulic Tank (page 4–64) .
5. Install the parking brake handle to the machine; refer to Assembling the
Parking Brake Assembly (page 6–16) . Ensure that the operation of the
parking brake sensor is correct after you install the brake handle.
6. Remove the caps or plugs that were installed to the hydraulic hoses and
fittings during the removal process.
7. Use the labels that you attached during the removal process to correctly
connect the hydraulic hoses to the fittings on the gear pump and hydraulic
tank; refer to
Installing the Hydraulic Hose and Tube (O-Ring Face Seal
Fitting) (page 4–5) .
8. Fill the hydraulic tank with the correct quantity of new hydraulic fluid.
9. Install the operator seat and seat base; refer to Installing the Operator Seat
(page 6–36) .
Hydraulic System: Service and Repairs Page 4–108 Groundsmaster 7210
16222SL Rev C