Toro Groundsmaster 7210, Service Manual

Page: 148 / 342

Disassembling the Transmission (continued)
g033444
Figure 84
1. Seal ring (2 each) 5. A-plate (3 each)
2. PTO shaft 6. Friction plate (3 each)
3. B-plate 7. Bearing
4. C-plate
57. Disassemble the PTO shaft assembly as follows:
A. Use a bearing puller to remove the bearing from the PTO shaft. Discard
the bearing.
B. Remove the spacer from the PTO shaft.
C. Slide the gear and clutch assembly from the PTO shaft.
D. Remove the key from the PTO shaft slot.
E. Remove the 2 seal rings from the PTO shaft grooves. Discard the seal
rings.
F. Remove the B-plate, C-plate, 3 A-plates, and 3 friction plates from the
PTO shaft.
G. Use a bearing puller to remove the bearing from the PTO shaft. Discard
the bearing.
g033445
Figure 85
1. Rod (3 each) 3. PTO gear assembly
2. Clutch assembly
58. Slide the 3 rods from the holes in the clutch assembly.
59. Slide the PTO gear assembly from the clutch assembly.
Note: Because the individual clutch components are not available,
disassembly of the clutch assembly is not necessary.
Hydraulic System: Service and Repairs Page 4–88 Groundsmaster 7210
16222SL Rev C