Removing the Fuel Tanks (continued)
G036995
g036995
Figure 15
1.
Flange-head screw (5 each)
4.
Control panel cover
2.
Control panel
5.
Swell latch (2 each)
3.
Locknut (2 each)
11. At the right fuel tank, remove the 5 flange-head screws (item 1 in
that secure the control panel to the right fuel tank. Carefully position the
control panel away from the fuel tank.
12. Loosen and remove the 2 screws, 2 clamps, and 2 flange nuts (items 32, 25,
and 26 in
) that secure each fuel tank to the frame of the machine.
13. Loosen and remove the screws (items 18 and 30 in
), flat washers,
plain washers, rubber washers, and flange nuts that secure the fuel tanks
to the frame of the machine.
14. Lift the fuel tank from the machine.
15. Locate and retain the spacer (items 29 and 15 in
) from the fuel tank.
Note:
For information regarding the fuel pump testing; refer to
.
Note:
Refer to the
Traction Unit Operator’s Manual
for the fuel/water separator
and fuel filter service information.
Installing the Fuel Tanks
1. If the strainer fitting was removed from the fuel tank, perform the following:
A. Clean the threads of the fuel tank and strainer fitting.
B. Apply a coat of fuel resistant thread sealant to the threads of the strainer
fitting.
C. Install the strainer fitting into the fuel tank and tighten the strainer.
2. If the elbow and straight fittings (items 43 and 44 in
) were removed
from the fuel/water separator head, apply thread sealant to the fittings before
installing.
Groundsmaster 7210
Page 3–19
Diesel Engine: Service and Repairs
16222SL Rev C
Summary of Contents for Groundsmaster 7210
