PTO Driveshaft
g033694
Figure 201
1.
Transmission assembly
3.
Roll pin (2 each)
5.
PTO driveshaft
2.
Bolt (4 each)
4.
Locknut (4 each)
6.
Cutting deck gearbox
Removing the PTO Driveshaft
Note:
The PTO driveshaft removal is easier if the machine is positioned on
a hoist.
1. Park the machine on a level surface, lower the cutting deck (or implement)
to the lowest setting, shut off the engine, set the parking brake, and remove
the key from the key switch.
2. Remove the fuse F1 (15 A) from the fuse block to prevent the PTO clutch
from engaging accidentally.
3. Disconnect the end yoke of the PTO driveshaft from the PTO shaft of the
transmission as follows:
A. Remove the roll pin from the end yoke and PTO shaft.
B. Loosen the 2 bolts and 2 locknuts.
C. Slide the driveshaft end yoke from the PTO shaft.
4. Disconnect the end yoke of the PTO driveshaft from the cutting deck gearbox
shaft as follows:
A. Remove the roll pin from the end yoke and gearbox shaft.
Groundsmaster 7210
Page 6–25
Chassis: Service and Repairs
16222SL Rev C
Summary of Contents for Groundsmaster 7210
