Polar Trac Wheels
g033678
Figure 185
1.
Front frame
7.
Drive track
13.
Locknut
2.
Bogie assembly
8.
Woodruff key
14.
Flat washer
3.
Locknut
9.
Wheel stud (5 each per hub)
15.
Hex nut
4.
Rear wheel hub (left)
10.
Rear wheel motor (left)
16.
Bogie pivot assembly (left)
5.
Wheel assembly (6 each)
11.
Parking brake (left)
17.
Wheel stud (5 each per hub)
6.
Wheel lug nut (5 each per wheel)
12.
Screw (4 each per motor)
Removing the Polar Trac Wheels
Note:
Refer to the
Polar Trac Operator's Manual
for additional information
regarding the drive track and wheel removal.
1. Park the machine on a level surface, lower the implement, shut off the
engine, and remove the key from the key switch.
Note:
When removing the wheels from a Polar Trac equipped machine,
remove the center wheel first to allow track clearance for the front or rear
wheels.
Chassis: Service and Repairs
Page 6–6
Groundsmaster 7210
16222SL Rev C
Summary of Contents for Groundsmaster 7210
