Toro Groundsmaster 7210, Service Manual

Page: 154 / 342

Assembling the Transmission (continued)
g033456
Figure 96
1. Bearing 4. Gear
2. PTO shaft 5. Clutch assembly
3. Spacer 6. Key
11. Install the clutch assembly and gear onto the PTO shaft:
A. Install the key into the PTO shaft slot.
Note: Ensure that the rounded ends of the key are aligned with the
rounded ends of the shaft slot.
B. Slide the clutch assembly and gear onto the PTO shaft. Also, align the
rods in the clutch with the holes in the B-plate.
Note: Ensure that the slot in the clutch is aligned with the key in the shaft.
C. Place the spacer onto the PTO shaft.
D. Press the bearing onto the PTO shaft so that the bearing is flush with the
shaft shoulder.
g033457
Figure 97
1. Friction plate 2. Pump housing
12. Apply clean hydraulic fluid to the friction plate and place it in the transmission
pump housing.
Note: Ensure that the tabs on the friction plates are placed in the housing
grooves.
Hydraulic System: Service and Repairs Page 4–94 Groundsmaster 7210
16222SL Rev C