Lift Cylinder
g033629
Figure 127
1.
Grease fitting
10.
O-ring
19.
Flange-head screw
2.
Retaining ring
11.
Tee fitting
20.
Bolt (2 each)
3.
O-ring
12.
O-ring
21.
Lock washer (2 each)
4.
Straight fitting (2 each)
13.
O-ring
22.
Lift control manifold
5.
O-ring
14.
Straight fitting
23.
O-ring
6.
Hydraulic hose assembly
15.
O-ring
24.
90° hydraulic fitting
7.
O-ring
16.
Lift cylinder
25.
O-ring
8.
O-ring
17.
Locknut
9.
Hydraulic hose
18.
Pivot pin
Removing the Lift Cylinder
WARNING
Before disconnecting or doing any work on the hydraulic system,
release all the pressure in the system; refer to
from the Hydraulic System (page 4–11)
.
1. Park the machine on a level surface, lower the cutting deck (or implement),
shut off the engine, set the parking brake, and remove the key from the
key switch.
2. Clean the hydraulic hose ends and fittings on the lift cylinder to prevent
contaminants from entering into the hydraulic system.
Hydraulic System: Service and Repairs
Page 4–124
Groundsmaster 7210
16222SL Rev C
Summary of Contents for Groundsmaster 7210
