Gear Pump
g034386
Figure 117
1.
Transmission assembly
7.
Hydraulic hose (output)
13.
Hydraulic hose
2.
Coupler
8.
Bolt (2 each)
14.
Hydraulic hose (suction)
3.
O-ring
9.
Lock washer (2 each)
15.
O-ring
4.
O-ring
10.
O-ring
16.
Hydraulic fitting
5.
Hydraulic fitting
11.
Hydraulic fitting
17.
O-ring
6.
O-ring
12.
Hose clamp
18.
Gear pump
Removing the Gear Pump
WARNING
Before disconnecting or doing any work on the hydraulic system,
release all the pressure in the system; refer to
from the Hydraulic System (page 4–11)
.
1. Park the machine on a level surface, lower the cutting deck (or implement),
shut off the engine, set the parking brake, and remove the key from the
key switch.
2. Remove the operator seat and seat base; refer to
.
3. Drain the hydraulic fluid from the hydraulic tank.
4. Clean the hydraulic hose ends and fittings on the gear pump and hydraulic
tank to prevent contaminants from entering into the system.
5. For assembly purposes, label all the hydraulic hoses and fittings.
Hydraulic System: Service and Repairs
Page 4–106
Groundsmaster 7210
16222SL Rev C
Summary of Contents for Groundsmaster 7210
