65
6.3.2.4
Command Structure Basic Rules
1)
Ignore case
Example: FUNC:VOLT:DC=func:volt:dc=Func:Volt:Dc
2)
Spaces cannot be placed before and after the colon.
Example
：
: FUNC : VOLT : DC wrong, correct: :FUNC:VOLT:DC
3)
Commands can be abbreviated or spelled all. Lowercase letters in the command can be omitted.
Example: FUNCtion:VOLTage:DC=FUNC:VOLT:DC
4)
The command is followed by a question mark (?) to execute a query corresponding to the command.
Example: FUNC?
6.3.3
Common Commands
1)
*CLS
This command clears the following registers: Standard Event Register, Query Event Register, Status Bit
Group Register.
2)
*ESE?
This command is used to query the value of the standard event enable register. The return value is
from 0 to 255.
3)
*ESR?
This command can be used to read the value of the standard event register. After the command is
executed, the value of the standard event register is cleared. The bit definition of the standard event
register is the same as the bit definition of the standard event enable register.
4)
*IDN?
This command is used to query the model number, SN number, and version number of the
instrument. For example: Tonghui, TH7110, SHF-888-8888, V1.0.0 Copyright(c) 2017-09-01.
5)
*OCP?
The OPC bit of the standard event register is set to 1 when all commands preceding this command
have been executed. Sending a query command will return the output buffer to "1".
6)
*RST
This command resets the power supply to the factory setting state.
7)
*SRE?
This command is used to query the value of the status enable register. When querying the status bit
Summary of Contents for TH7105
Page 14: ...9...
