86
Command description: This command is used to set the end angle of the current step in the
programmable mode. <value> indicates the end angle, and the range is 0~359
°
.
The command is invalid when the output is turned on.
Command Syntax: :FUNCtion:EndANGle:PROGram?
Shorthand for command: :FUNC:EANG:PROG?
Command description: This command is used to query the termination angle of the current step in the
programmable mode, and returns <value>, which is equal to 0~359. The
command is invalid when the output is turned on.
6.3.5.28
:FUNC:RESULT
Command Syntax: :FUNCtion:RESULT:MANUal NONE or :FUNCtion:RESULT:MANUal 0
Shorthand for command: :FUNC:RESULT:MANU NONE or :FUNC:RESULT:MANU 0
Command description: This command is used to set the result display mode to NONE in manual mode.
Command Syntax: :FUNCtion:RESULT:MANUal LAST or :FUNCtion:RESULT:MANUal 1
Shorthand for command: :FUNC:RESULT:MANU LAST or :FUNC:RESULT:MANU 1
Command description: This command is used to set the result display mode to LAST in manual mode.
Command Syntax: :FUNCtion:RESULT:MANUal ALL or :FUNCtion:RESULT:MANUal 2
Shorthand for command: :FUNC:RESULT:MANU ALL or :FUNC:RESULT:MANU 2
Command description: This command is used to set the result display mode to ALL in manual mode.
Command Syntax: :FUNCtion:RESULT:MANUal P/F or :FUNCtion:RESULT:MANUal 3
Shorthand for command: :FUNC:RESULT:MANU P/F or :FUNC:RESULT:MANU 3
Command description: This command is used to set the result display mode to P/F in manual mode.
Command Syntax: :FUNCtion:RESULT:MANUal?
Shorthand for command: :FUNC:RESULT:MANU?
Command description: This command is used to query the result display mode in manual mode. When
the result display mode is NONE, it returns 0; when the result display mode is LAST,
it returns 1; when the result display mode is ALL, it returns 2; when the result
display mode is P/F , return 3.
Command Syntax: :FUNCtion:RESULT:PROGram LAST or :FUNCtion:RESULT:PROGram 0
Shorthand for command: :FUNC:RESULT:PROG LAST or :FUNC:RESULT:PROG 0
Command description: This command is used to set the result display mode to LAST in the program mode.
The command is invalid when the output is turned on.
Command Syntax: :FUNCtion:RESULT:PROGram ALL or :FUNCtion:RESULT:PROGram 1
Shorthand for command: :FUNC:RESULT:PROG ALL or :FUNC:RESULT:PROG 1
Command description: This command is used to set the result display mode to ALL in the program mode.
The command is invalid when the output is turned on.
Summary of Contents for TH7105
Page 14: ...9...
