85
Command description: This command is used to query the step connection switch status of the current
step. Returns 0 when the step connection is turned off, and returns 1 when the
step connection is turned on.
6.3.5.26
:FUNC:SANG
Command Syntax: :FUNCtion:StartANGle:MANUal <value>
Shorthand for command: :FUNC:SANG:MANU <value>
Command description: This command is used to set the starting angle in manual mode, <value> is the
starting angle, and the range is 0~359
°
.
Command Syntax: :FUNCtion:StartANGle:MANUal?
Shorthand for command: :FUNC:SANG:MANU?
Command description: This command is used to query the starting angle in manual mode and returns
<value>, which is equal to 0~359.
Command Syntax: :FUNCtion:StartANGle:PROGram <value>
Shorthand for command: :FUNC:SANG:PROG <value>
Command description: This command is used to set the starting angle of the current step in the
programmable mode. <value> indicates the starting angle, and the range is
0~359
°
. The command is invalid when the output is turned on.
Command Syntax: :FUNCtion:StartANGle:PROGram?
Shorthand for command: :FUNC:SANG:PROG?
Command description: This command is used to query the starting angle of the current step in the
programmable mode, and returns <value>, which is equal to 0~359. The
command is invalid when the output is turned on.
6.3.5.27
:FUNC:EANG
Command Syntax: :FUNCtion:EndANGle:MANUal <value>
Shorthand for command: :FUNC:EANG:MANU <value>
Command description: This command is used to set the end angle in manual mode, and <value> indicates
the end angle, ranging from 0 to 359
°
.
Command Syntax: :FUNCtion:EndANGle:MANUal?
Shorthand for command: :FUNC:EANG:MANU?
Command description: This command is used to query the end angle in manual mode, and returns
<value>, which is equal to 0~359.
Command Syntax: :FUNCtion:EndANGle:PROGram <value>
Shorthand for command: :FUNC:EANG:PROG <value>
Summary of Contents for TH7105
Page 14: ...9...
