Tonghui Electronics TH7105, Operation Manual

Page: 92 / 187

87
Command Syntax: :FUNCtion:RESULT:PROGram P/F or :FUNCtion:RESULT:PROGram 2
Shorthand for command: :FUNC:RESULT:PROG P/F or :FUNC:RESULT:PROG 2
Command description: This command is used to set the result display mode to P/F in the program mode.
The command is invalid when the output is turned on.
Command Syntax: :FUNCtion:RESULT:PROGram?
Shorthand for command: :FUNC:RESULT:PROG?
Command description: This command is used to query the result display mode in the programmable
mode. When the result display mode is LAST, it returns 0; when the result display
mode is ALL, it returns 1; when the result display mode is P/F, it returns 2. The
command is invalid when the output is turned on.
6.3.5.29 :FUNC:EXIT

Command Syntax: :FUNCtion:EXIT
Shorthand for command: :FUNC:EXIT
Command description: This command is used to exit the result display state. The command is invalid when
the output is turned on.
6.3.5.30 :FUNC:SR

Command Syntax: :FUNCtion:SaveResult
Shorthand for command: :FUNC:SR
Command description: This command is used to save the test results when the result display mode is ALL.
The command is invalid when the output is turned on.
6.3.5.31 :FUNC:OCF

Command Syntax: :FUNCtion:OverCurrentFold:MANUal ON
or :FUNCtion:OverCurrentFold:MANUal 1
Shorthand for command: :FUNC:OCF:MANU ON or :FUNC:OCF:MANU 1
Command description: This command is used to turn on the over current fold function in manual mode.
The command is invalid when the output is turned on.
Command Syntax: :FUNCtion:OverCurrentFold:MANUal OFF
or :FUNCtion:OverCurrentFold:MANUal 0
Shorthand for command: :FUNC:OCF:MANU OFF or :FUNC:OCF:MANU 0
Command description: This command is used to turn off the over current fold function in manual
mode. The command is invalid when the output is turned on.