Tonghui Electronics TH7105, Operation Manual

Page: 115 / 187

110
1~32 0x10 0x00 0x16 0x00 0x01 0x02 0x00
0x00
or
0x01
Calculated based
on the first 8 bytes
3) Return Instruction Format
6.4.2.22
Address 23 (Voltage Limit)
1) Commands Description
This command is used to set the allowable difference between the output voltage and the set voltage in
manual mode. The command data range is 5.0~50.0V.
2) Send Instruction Format
Instrument
address
Function
code
High
address
Low
address
High
bytes
Low
bytes
Number
of data
Data byte 1~4
CRC
Low
CRC
High
1~32 0x10 0x00 0x17 0x00 0x02 0x04
5.0~50.0, 4 bytes
stored in float
point type
Calculated based on
the first 11 bytes
3) Return Instruction Format
6.4.2.23
Address 24 (Timer Seconds)
1) Commands Description
This command is used to set the value of the timer seconds in manual mode. Instruction data byte 1
ranges from 0 to 59. The command is invalid when the output is turned on.
2) Send Instruction Format
Instrument
address
Function
code
High
address
Low
address
High
bytes
Low
bytes
Number
of data
Data
byte 1
Data byte
2
CRC
Low
CRC
High
Instrument
address
Function
Code
High Address Low Address High bytes Low bytes CRC Low CRC High
1~32 0x10 0x00 0x16 0x00 0x01
Calculated based on the first 6
bytes
Instrument
address
Function
Code
High Address Low Address High bytes Low bytes CRC Low CRC High
1~32 0x10 0x00 0x17 0x00 0x02
Calculated based on the first 6
bytes