Tonghui Electronics TH7105, Operation Manual

Page: 127 / 187

122
1~32 0x10 0x00 0x2D 0x00 0x02 0x04
0.1~999.9, 4 bytes
stored in float
point type
Calculated based on
the first 11 bytes
3) Return Instruction Format
6.4.2.45
Address 46 (Rise Time)
1) Command Description
This command is used to set the rise time of the current step in the programmed mode. The command
data range is from 0.0 to 999.9s. Command is invalid when output is turned on.
2) Send Instruction Format
Instrument
address
Function
code
High
address
Low
address
High
bytes
Low
bytes
Number
of data
Data byte 1~4
CRC
Low
CRC
High
1~32 0x10 0x00 0x2E 0x00 0x02 0x02
0.0~999.9, 4 bytes
stored in float
point type
Calculated based on
the first 11 bytes
3) Return Instruction Format
6.4.2.46
Address 47 (Fall Time)
1) Command Description
This command is used to set the fall time of the current step in the programmed mode. The command
data range is from 0.0 to 999.9s. Command is invalid when output is turned on.
2) Send Instruction Format
Instrument
address
Function
code
High
address
Low
address
High
bytes
Low
bytes
Number
of data
Data byte 1~4
CRC
Low
CRC
High
Instrument
address
Function
Code
High Address Low Address High bytes Low bytes CRC Low CRC High
1~32 0x10 0x00 0x2D 0x00 0x02
Calculated based on the first 6
bytes
Instrument
address
Function
Code
High Address Low Address High bytes Low bytes CRC Low CRC High
1~32 0x10 0x00 0x2E 0x00 0x02
Calculated based on the first 6
bytes