15
1
）
Description
This key is the voltage mode setting key, which can be set to “AUTO” or “HIGH”. When the voltage
mode is set to “AUTO”, it will automatically judge whether the voltage is high or low based on the
setting voltage. When the voltage mode is set to “HIGH”, the voltage will be set to HIGH (i.e. the range
of 0~300V).
2
）
Operation
In <Measurement Display> page, press AUTO soft key to switch between “AUTO” and “HIGH”.
3.1.1.3
State Zoon Description
OFF: Output is not enabled
AUTO: Voltage mode is in
“AUTO”
: Surge/drop function is enabled
3.1.2
Test Status Instruction
In <MeasDisp> page, press ON/OFF button to enable output. When the test mode is in MANU SETUP mode,
the <MeasDisp> page is shown in figure 3-6:
Figure 3-6 MANU SETUP Mode <MeasDisp> Page
When the test mode is in PROG SETUP, the <MeasDisp> page is shown in figure 3-7:
Summary of Contents for TH7105
Page 14: ...9...
