81
Shorthand for command: :FUNC: TIME:SEC?
Command description: This command is used to query the seconds value of the timer in manual mode. It
returns <value> and its value is equal to 0~59.
Command Syntax: :FUNCtion:TIME:MINute <value>
Shorthand for command: :FUNC:TIME:MIN <value>
Command description: This command is used to set the score of the timer in manual mode. <value>
indicates the timer score, which ranges from 0 to 59.
Command Syntax: :FUNCtion:TIME:MINute?
Shorthand for command: :FUNC:TIME:MIN?
Command description: This command is used to query the score of the timer in manual mode, and
returns <value>, which is equal to 0~59.
Command Syntax: :FUNCtion:TIME:HOUR <value>
Shorthand for command: :FUNC:TIME: HOUR <value>
Command description: This command is used to set the value when the timer is in manual mode. <value>
indicates the timer value, which ranges from 0 to 99.
Command Syntax: :FUNCtion:TIME:HOUR?
Shorthand for command: :FUNC:TIME: HOUR?
Command description: This command is used to query the value of the timer in manual mode. It returns
<value> and its value is equal to 0~99.
Command Syntax: :FUNCtion:TIME:UNIT:SECond
Shorthand for command: :FUNC:TIME: UNIT:SEC
Command description: This command is used to set the delay determination time and measurement time
in the programmable mode in seconds. The command is invalid when the output is
turned on.
Command Syntax: :FUNCtion:TIME:UNIT:MINute
Shorthand for command: :FUNC:TIME: UNIT:MIN
Command description: This command is used to set the unit as minute for the delay judgment time and
measurement time in the programmable mode. The command is invalid when the
output is turned on.
Command Syntax: :FUNCtion:TIME:UNIT:HOUR
Shorthand for command: :FUNC:TIME: UNIT:HOUR
Command description: This command is used to set the unit as hour for the delay judgment time and
measurement time in the programmable mode. The command is invalid when
the output is turned on.
Command Syntax: :FUNCtion:TIME:UNIT:?
Shorthand for command: :FUNC:TIME: UNIT:?
Command description: This command is used to query the time unit of the current step in the
programmable mode. When the unit is second, it returns 0; when the unit is
Summary of Contents for TH7105
Page 14: ...9...
