17
Under <MeasDisp> page, press DATA HOLD soft key to keep output constant. Press this key again, the
output will change according to real situation.
3.1.2.2
State Zoon Description
ON: Output is enabled
AUTO: Voltage mode is in
“AUTO”, it will automatically judge whether the voltage is high or low
based on the setting voltage.
: Surge/drop function is enabled. The icon turns green when the instrument is testing.
: It indicates the testing time. If the time is set, the time will countdown, and when it
reaches 00:00:00, the output will be disabled automatically.
3.2
<MANU SETUP>
3.2.1
Memory Setting
3.2.1.1
Description and Operation
1)
Description
In MANU SETUP mode, the instrument is a pure power supply, users are able to set memory sequence,
voltage, voltage mode, frequency, current upper limit, current lower limit, SD voltage, SD site, SD time,
SD Connection and other parameters show in figure 3-8:
Figure 3-8
2)
Operation
Summary of Contents for TH7105
Page 14: ...9...
