78
Command description: This command is used to set the power high limit of the current step in the
programmable mode. <value> represents the peak power high limit value, and
the range is 0~1000W. The command is invalid when the output is turned on.
Command Syntax: :FUNCtion:POWer:HIghLiMiT?
Shorthand for command: :FUNC:POW:HILMT?
Command description: This command is used to query the power high limit of the current step in the
programmable mode, and returns <value>, which is equal to 0~1000W. The
command is invalid when the output is turned on.
6.3.5.18
:FUNC:POW:LOLMT
Command Syntax: :FUNCtion:POWer:LOwLiMiT <value>
Shorthand for command: :FUNC:POW:LOLMT <value>
Command description: This command is used to set the power low limit value of the current step in the
programmable mode. <value> indicates the peak power low limit value, and the
range is 0~1000W. The command is invalid when the output is turned on.
Command Syntax: :FUNCtion:POWer:LOwLiMiT?
Shorthand for command: :FUNC:POW:LOLMT?
Command description: This command is used to query the power low limit of the current step in the
programmable mode, and returns <value>, which is equal to 0~1000W. The
command is invalid when the output is turned on.
6.3.4.19
:FUNC:PF:HILMT
Command Syntax: :FUNCtion:PowerFactor:HIghLiMiT <value>
Shorthand for command: :FUNC:PF:HILMT <value>
Command description: This command is used to set the high limit of the power factor of the current step
in the programmable mode. <value> represents the high limit of the peak power
factor, and its range is 0~1000W. The command is invalid when the output is
turned on.
Command Syntax: :FUNCtion:PowerFactor:HIghLiMiT?
Shorthand for command: :FUNC:PF:HILMT?
Command description: This command is used to query the high limit of the power factor of the current
step in the programmable mode, and returns <value>, which is equal to 0~1000W.
The command is invalid when the output is turned on.
Summary of Contents for TH7105
Page 14: ...9...