Tomey UD-600, Operator'S Manual

Page: 176 / 262

3-148
6) Display the connection status N of LAN communications. If
the LAN is in connected state, the letters of " ON Line" is dis-
played and the LAN speed "ON Line" at the side of it, while if
in line-off state, "OFF Line" is displayed.
7) Press the Set key
O
to set the information contents as dis-
played. When the setting has been completed, the message
of "Setting Complete" is displayed.
8) Press the Test key
P
to confirm the status of connection.
This test is done to confirm that the physical connection
has been made in normal condition. However, no confir-
mation can be made if the setting of IP address has been
made. If physical connection is normal, the message of
"Test Complete" should be displayed.
[Example]
„
If only this instrument and TOMEY Link server or a computer
for receiving DATA Transfer, the setting can be made by fol-
lowing the below.
1) Conformation of IP address of the computer
Confirm and take a note of the IP address and sub net mask of
the computer in which DATA Transfer is installed. See the op-
erator manual of DATA Transfer for the detai.
2) Setting of this instrument
The table below is the example with the conditions that the com-
puter in which DATA Transfer is installed has the IP address as
[192.168.2.128] and the sub net mask as [255.255.255.0].
They are set manually.
3.11 Utilities
IP address
*1 : The numbers the PC uses. (In the example arbitrary numbers between 1 and 255)
Host IP
address
Default
gateway
Sub net mask
The computer (PC) This instrument
Confirm at DATA Transfer screen The same as the left
Confirm at DATA Transfer screen The same as the left
All 0
PC's IP address
192 168 2 128 192 168 2 129
(*1)
255 255 255 0 255 255 255 0
0 0 0 0
192 168 2 128