Tomey UD-600, Operator'S Manual

Page: 67 / 262

3-39
$
&KCI
+&0Q 5GZ/CNG /C[
2CVKGPV61/'; 2J[UKEKCP57<7-+
$CEM
#TGC
2KZ
59
OO
%NGCT
+PUKFG
%NGCT
#..
%CNEWNCVKQP
4CPIGQH)TC[.GXGN
2#)'8OU
6)F$UVGRU
%6F$UVGRU
0)F$
()F$
(TCOG4CVG*KIJ
(QEWU4GIKQP/KFFNG
5EQRG0QTOCN
R
1 &
1&
85GV
10) Press the Calculation key
L
, so the beginning point and
the ending point are connected to start area calculation. The
letters of "Now Processing" are shown in the results dis-
play panel
M in process of calculation. When the calcula-
tion is finished, the calculation results will be displayed.
And the pixels corresponding to the gradation range in the
enclosure is colored with a light blue. The pixel count
P
will be displayed below the calculation results. (Fig. 4)
11) Then press the Clear Inside key Q , so the calculation results
will b deleted leaving lines.
„ „
„ „ „ If any cursor position is once deleted, such position will
not be restored. Therefore, sufficient confirmation shall
be given before deleting the cursor position.
12) Press the Clear All key
R
to delete all calculation results
and lines.
13) Press the Area key
S
to return to the main screen. (Fig. 2)
All the areas which have been set are deleted at the same
time.
(Fig. 4)
S
N
P
R
Q
O
3.3 B-scan diagnosis