Tomey UD-600, Operator'S Manual

Page: 43 / 262

3-15
„ „
„ „
„
Sufficient care should be taken not to pinch your fingers
when adjusting the angle of the monitor display.
„ „ „ „ „
Adjust the monitor to such an angle that the display can
be watched in the front forward from the examiner. Since
the LCD has a narrow visible angle range, the core of the
screen may be reversed when watching it from other di-
rections.
3) Adjust the angle of the monitor display as needed. For this
adjustment, hold the button of the monitor display and care-
fully adjust the display angle. Adjusting for the vertical
direction only can be given, but not for the horizontal di-
rection.
b) Changing the mode to the B-mode function
„ „
„ „
„
After switching over the mode to the B-scan diagnosis
function, the acquired data can be deleted. Sufficient care
must be taken for this deleting operation.
Ԙ
24+06
#$
616#. %1064#56
(#4
$KQ
(4''<'
0'#4
Press the A/B-Bio select button
A
for longer than 3 seconds to
change the mode to the B-mode image diagnosis function.
The operation while making access to the memory card or while
in process of LAN communication, no change of the mode can
be obtained even by pressing this button.
3.3 B-scan diagnosis