Tomey UD-600, Operator'S Manual, Page: 40 / 262

3-12
3.2.5 Connection for data communication
„ „ „ „ „
For data communication with this instrument, network-
ing available system "TIMEY Link" (optional) or test data
receiving software "DATA Transfer" (an accessory) is
needed.
„ „
„ „ „ See each of operator manuals of TOMEY Link and DATA
Transfer for their setting and operation.
„ „
„ „ „ In order to connect to TOMEY Link and DATA Transfer,
connection setting should be done. See "3.11.2 f) Setting
of data communication" for the actual settingl.
a) LAN wiring
„ „
„ „
„
Be sure to connect this instrument with a computer
through a hub. Direct connection with a computer
doesn’t work properly.
„ „ „ „ „
Be sure to get a permission from your network adminis-
trator when performing network setting.
„ „
„ „ „ Confirm the version number of this instrument before
use. Version M3.0/G.10 and higher works with DATA
Transfer. See "4.5 Software version information" regard-
ing how to confirm the version number.
Connection between this instrument and TOMEY Link server or
DATA Transfer needs LAN ( Local Area Network). Please pre-
pare the following things.
LAN cable (Straight : Cat.5 and over)
: 2
Hub for LAN (100MHz Switching hub is recommended) : 1
A TOMEY Link or DATA Transfer installed computer
: 1
[Example]
HUB for LAN
To a patient database
A barcode reader etc
This instrument
TOA computer installed with
TOMEY Link or DATA Transfer
3.2 Preparation before operation