Tomey UD-600, Operator'S Manual, Page: 117 / 262

3-89
5VCTVKPI7&
XGT
#FLWUVKPI2TQDG5ECP
2TQDG'TTQT 2TQDG'TTQT
1-
3) If the calibration of the probe is not given, the message of
"Probe Error" A and the OK key B will be displayed. (Fig.
3) If the OK key
B
is next pressed, the Measurement screen
(the initial screen) will be displayed. (Fig. 2) If the error
message is displayed, see "6. TROUBLESHOOTING". If
this error message is repeatedly displayed, consult with your
Tomey representative from which you purchased your in-
strument.
(Fig. 3)
A
B
3.6 Biometry