Tomey UD-600, Operator'S Manual

Page: 80 / 262

3-52
(Fig. 1)
l) Transfer of patient data
„ „ „ „ „
For data communication with this instrument, "TOMEY
Link", the networking available system (optional), or
"DATA Transfer" (accompanying this instrument) is
needed.
„ „
„ „ „ See each manual of TOMEY Link or DATA Transfer for
their setting.
„ „
„ „ „ Connecting to TOMEY Link or DATA Transfer needs com-
munication setting. See "3.8.2 f) Setting of data commu-
nication".
„ „ „ „ „
Without ID number data transfer may not be done de-
pending on the setting. See "3.8.2 f) Setting of data com-
munication".
„ „
„ „
„
Input of ID number for data transfer is recommended.
Data can be transferred without ID number, but patient
identification may not be possible in the test data output
with DATA Transfer. When sending the data without ID
number, confirm the data immediately after data transfer
and move and store the data in an appropriate place.
When connected to TOMEY Link, all the data without
number are regarded as data of the same patient. Be
careful not to make a mistake.
$
&KCI
+&0Q 5GZ/CNG /C[
5CXG
'EJQ
OCIG
<QQO
/QXG
<QQO
/GCUWTG
.GPIVJ
#TGC
8GEVQT#
/18'
8GEVQT#
5OQQVJKPI
3WCF9KPFQYU
7VKNKV[
2CVKGPV61/'; 2J[UKEKCP;#/#&#
2#)'8OU
6)F$UVGRU
%6F$UVGRU
0)F$
()F$
(TCOG4CVG*KIJ
(QEWU4GIKQP/KFFNG
5EQRG0QTOCN
R
1 &
1&
0'9 0'9
2CVKGPV
2CVKGPV
':2146
1) Press the EXPORT
A
to change the screen mode to the
EXPORT Confirmation screen (Fig. 2).
3.3 B-scan diagnosis
A