Tomey UD-600, Operator'S Manual

Page: 188 / 262

3-160
2TKPV/QFG
+PVGTPCN2TKPVGT
8KFGQ2TKPVGT
/GCUWTG
5VCPFCTF
5KORNG
+1.%CNE
5VCPFCTF
5KORNG
/GCUWTG&CVCKU
2TKPVGF
/GCUWTG&CVCKU
PQV2TKPVGF
2) Next select the output mode whether it is from the built-in
printer or the video printer. Press the Internal Printer key
B for selecting the built-in printer and press the Video
Printer key
C
for the video printer.
3) If the built-in printer is selected, the following screen modes
will furthermore be set for the Measure frame D and the
IOL Calculation frame
E
.
In the Measure frame D , the printout mode used when the
PRINT key is pressed while the Axial Length Measurement
Finish screen, the Edit screen, or the Patient Data Wave-
form Display screen is being displayed. In the IOL Calcu-
lation frame
E
the printout mode used when the PRINT
key is pressed while the IOL Calculation Results Display
screen or the Patient Data Edit screen is being displayed.
The Measure data key
F is used to set the axial length
measurement value for the printout mode used when the
IOL Power Calculation Results Display screen or the Pa-
tient Data Edit screen is being displayed and to set for "Print"
or "No print" of measuring waveforms.
4) Select the printout mode.
„ Standard: Standard printout mode
„ Simple: Simple printout mode
(As for the details, see "3.9.2 Contents of printout".)
5) Press the Print Mode key G to return the screen display to
the Utility screen (Fig. 1).
(Fig. 2)
G
B
F
E
C
D
3.11 Utilities