Tokyo Keiki UFP-20, Installation & Operation Manual

Page: 81 / 218

1-70
10. Thickness of lining
Input lining thickness by numeric button directly. Here for example, input “1.00mm”, then push
“ Enter ” key (F3 button) to proceed to next step.
Fig. 1.2.8-15 Lining thickness input menu
11. Fluid Selection
Select fluid from default choices or User Defined by direction or numeric button.
Here for example, select “ 1:Water ”, then push “ Select ” key (F3 button) to proceed next step.
Fig. 1.2.8-16 Fluid type selection
After you select material, you will see predefined sound speed and viscosity, normally just
proceed to next. If you would like to select any un-listed fluid, please select “ User Defined ” then
enter actual sound speed of the fluid later at the next extra menu.
L i n i n g C o n d i t i o n
T h i c k n e s s
0 . 0
0 m m
# 0 1 : 1 0 0 / S t e e l / 1 M
B a c k C l e a r E n t e r
Push Enter key
F l u i d C o n d i t i o n
T y p e
1 : W a t e r
2 : S e a w a t e r
3 : E t h y l e n e G l y c o l ( 5 0 w t % )
4 : G l y c e r i n
5 : A c e t o n e
6 : U s e r D e f i n e d
# 0 1 : 1 0 0 / S t e e l / 1 M
B a c k S e l e c t
Push Select key
Note: Over ½ of pipe diameter is invalid value. (Max range: up to 100mm)