Tokyo Keiki UFP-20, Installation & Operation Manual

Page: 161 / 218

2-28
(3) Set log interval
Minimum logging interval is every 5sec. Maximum is every 99h59min59sec.
Table 2.2.5-1 Range of interval
Default min. max.
00:00:30 00:00:05 99:59:59
(4) Set logging time
Set start date & time and stop date & time for Logging. After both schedule set as correctly,
“ ” icon will appear on the upper side of LCD.
(5) Sync. totalizing
Synchronized totalizing and logging. This item is set
“
Yes
”, Logging and totalizing at the same
time.
(6) Start logging
After all setting done, back to measuring mode as Fig.2.2.5-4.
When scheduled time comes, Logging will start with blinking
“ ” icon.
In case of set sync. totalization as
“
Yes
”, totalizing will start at the same time.
Fig. 2.2.5-6 Waiting for Logging
Note1:
Max. available Logging schedule will be informed before set Stop date & time.
Please set shorter schedule than informed one. Please be aware that this is
only a rough guide.
Note2:
By inputting
“99-99-99” at Stop date section, it can be logged max. time.
Note:
Logging will not start until back to measuring display.
Please wait on the measuring display until Logging starting.
Waiting for Logging
C H 1 : # 0 1 : 1 0 0 / S t e e l / 1 M
F l o w
０ ． １ ０ ０
m
3
/ h
V e l o c i t y
１ ． ０ ０ ０
m / s
1 - T S 2 3 . 0 ° C
1 - T R 2 4 . 0 ° C
+ T o t a l
０
x 1 m
3
- T o t a l
０
x 1 m
3
L o g S t a r t M e n u