Tokyo Keiki UFP-20, Installation & Operation Manual

Page: 172 / 218

2-39
(2) Meter selection
You can set averaging time, meter type, measurement setting (number of path or channel) or
calculation form.
Fig. 2.2.8-3 Meter selection menu
1. Average times
Moving averaging time by measurement time.
Table 2.2.8-2 Range of average time
Default min. [times] max. [times]
15 1 120
2. Meter type
You can select which type of meter you intend to use from following options.
Select by direction or numeric button, then push
Enter key (F3 button) to define.
Table 2.2.8-3 Selectable items for meter type
Selectable meter type
flow meter
mass meter
heat meter
3. Meas. setting
You can select which type of measurement way from following options.
Table 2.2.8-4 Selectable items for meas. setting
Selectable type Remarks
1path / 1pipe By 1 pair of transducers for 1 pipe
2path / 1pipe By 2 pair of transducers for 1 pipe
1path / 2pipe By 2 pair of transducers for 2 pipe
6
M e t e r S e l e c t i o n
1 : A v e r a g e T i m e
1 5
2 : M e t e r T y p e
f l o w m e t e r
3 : M e a s . S e t t i n g
1 p a t h / 2 p i p e
4 : C a l c u l a t i o n F o r m
N o n e
# 0 1 : 1 0 0 / S t e e l / 1 M
B a c k S e l e c t