Tokyo Keiki UFP-20, Installation & Operation Manual

Page: 5 / 218

(4)
Introduction
Thank you for purchasing our Ultrasonic Flowmeter.
This Manual includes detailed explanations regarding safety cautions, structure, set up,
operation, troubleshooting, and maintenance of the Ultrasonic Flowmeter.
Read this manual carefully before operation to ensure an adequate understanding of the
equipment.
Proper use of the Operation Manual
The following points must be observed:
1. Carefully read the Manual. The contents of this Manual are very important and should be
read completely.
2. Store the Manual in a safe location. The Manual is essential for appropriate operation of
the equipment. Store the manual in a safe and accessible location. The storage location
and person in charge should be determined after careful consideration.
3. Ensure that the Manual is supplied to the operator of the equipment. The representative
or dealer of this equipment must provide this Manual to the user who will actually
operate the equipment.
4. The Manual must be replaced if lost or damaged. If the Manual is lost, contact the
representative. A new manual is available for purchase.
5. Ensure that the warning label is properly attached. If the warning label is illegible or has
come off, contact the manufacturer to purchase a new label.
Precautions regarding the Manual
This Manual was written in accordance with the standard specifications of the original
instrument.
In case of discrepancies between written specifications and approved drawings, the
drawings should be given precedence.
Restrictions and precautions necessary to maintain the equipment
The following items must be observed in order to maintain the equipment.
1. Do not drop or bump the unit and the transducer.
2. Do not use the unit in environmental conditions (ambient temperature, ambient humidity)
other than those prescribed in this manual.
3. Do not use the unit with a power supply other than the one prescribed in this manual.
4. Do not use damaged or worn-out cables (power cables, coaxial cables, signal cables).
5. Under no circumstances attempt to modify or disassemble the instrument. Contact the
manufacturer in the event of a malfunction.
6. Do not use the unit and/or accessories in restricted hazardous areas.
7. Paying attention is required when touch the connectors. The excessive static electricity
might cause a defective operation and the breakdown
8. In EU area, do not dispose this unit as household waste, please contact with the nearest
representatives.