Tokyo Keiki UFP-20, Installation & Operation Manual

Page: 72 / 218

1-61
3. Store site data
Finalize wizard by store all data on this menu. Select “ 2: Yes ” by direction or numeric button.
Then push “ Select ” key (F3 button) to proceed next step.
Fig. 1.2.7-32 Data storing menu
4. Data for Channel 2
Proceeded 2-4 menu, following message shows up for copying the site setting.
Fig. 1.2.7-33 Message of using same data for CH2
If you select “ Yes ” (F1 button), same site setting data will be used 2
nd
channel setting.
Otherwise when you select “ No ” (F1 button), return to first menu of wizard.
You need to make other site setting data through this wizard for 2
nd
channel.
D A T A S t o r e
1 : N o
2 : Y e s
# 0 1 :
1 0 0 / S t e e l / 1 M
B a c k S e l e c t
Push Select key
M e s s a g e
U s e t h i s d a t a f o r C H 2 ?
Note: When you select “CH2” at first channel selection, only CH2 data is made
through wizard process.
You will need to set “CH1” parameters independently.