– 90 –
Equipment Detection
This function detects and registers all components connected to the same network
as the System Manager.
Page Introduction
(1) Device been added Added device list
(2) Scan
(3) Import
(4) Scanning list
(A) Back
(B) Next
Settable Items
1. Import the MAC addresses
2. Edit the devices information
Setting Method
1) Click "Scan" to display the list of connected devices.
2) Tick the rows from the added device list and the rows from the scanned list of
devices, then click "Import“.
The MAC address of the scanning devices will be filled into the added device list.
3) Click "Save“ after finishing the import to save the page and return to the "Device
List".
4) Click “Return” to return to the “Device List" page without saving any changes.
Note: 1. If you do not choose any import data or export data, message "Please
select the scanning list (export) and added device list(import)” will be
popped up with the action of clicking "Import”.
2. If the same MAC address is imported into different devices, message
"Cannot import the same MAC address" will be popped up.
