Toa IP-3000SM, Operation Instructions Manual

Page: 101 / 131

– 101 –
Contact Microphone Settings
Perform settings for using the ‘Contact Microphone.’ For the IP-300RM, use the
following screen:
Item Description
Cancel All Broadcasting
Destination SW settings SW Contact Set the switch that cancels all broadcasting
destination settings
Chime SW settings SW Contact Set the switch that designates whether or not to sound
a chime tone
SW-LED Contact Set the chime enable or disable indications, and also
the chime status indications.
Microphone SW settings SW Contact Set the switch for staring microphone broadcasts.
Contact classification Select either ‘Lock’ or ‘Non-lock.’*
Contact for Broadcast In-
progress LED Set the microphone broadcast status indications
External input SW settings Playing Equipment Select the playing equipment (from among those
set on the ‘Playing Equipment Settings’ screen).
Musical Numbers Enter the musical numbers (enter the musical number
range set on the ‘Playing Equipment Settings’ screen).
SW Contact] Set the switch to start broadcasts.
Contact for External Input
In-Progress LED[ Set the broadcast status indications
Emergency microphone
SW settings SW Contact Set the switch to start emergency broadcasts.
Contact Classification] Select either ‘Lock’ or ‘Non-lock.’*
Contact for ‘Emergency
Broadcast In-Progress’
LED Set the emergency broadcast status indications.
Recording function Select either ‘Enable’ or ‘Disable.’
Recording In-Progress
LED settings SW-LED Contact Set the recording in-progress status indications
Playback SW settings SW Contact Set the switch that plays back the recording contents.
SW-LED Contact Set the recording content playback status indications.
Monitor settings SW Contact Set the switch that selects the monitor audio input.
Audio Input Select the audio input channel (from among the
channels for which the audio input classification has
been set to ‘Monitor’ on the ‘Equipment Settings’
screen).
SW-LED Contact Set the ‘Monitor Selection in Progress’ status
indications.
Signal/Peak settings Signal-LED Contact Set the status indications for when the microphone
input level exceeds Signal level (−40 dB).
Peak-LED Contact Set the status indications for when the microphone
input level exceeds Peak level (+8 dB).