– 32 –
6. SETUP FLOW PROCEDURE
The procedure for setting the network PA system is as follows:
1. Before performing system settings
System and equipment settings are required before the network PA system can be
operated,
Use a web browser to perform settings.
All system setting contents are saved to the System Manager.
2. Turn ON the system power.
Power must be supplied to the system before system settings can be performed.
●
P
recautions to be observed when turning power ON
Before turning ON the system power, confirm the following:
・
Cables and connectors are correctly and securely wired and connected.
・
The functional ground of each component is correctly connected.
● Turning the power ON
Follow the below procedure to turn ON the power:
(1) Turn ON the power of the connected network components (switching hub, etc.).
(2) Turn ON the power of each network PA component.
3. Setup Procedure
3-1. Register equipment in the system.
Register each component connected to the system (System settings →
Equipment list screen).
Perform network settings for each component immediately after
registration.
3-2. Perform system settings.
Set each necessary function.
3-3. Save the settings.
Save the set contents.
