– 22 –
Terminal Connections
Network connections
For this connection, use Category 5 or greater UTP straight cable with an RJ-45
connector.
NOTE:
Connect this terminal to a network
component capable of full-duplex
communication.
Audio I/O terminal connections
For wiring of the connectors attached to the audio I/O terminals, please refer to
Page 2-6 “Detachable Terminal Plug Connections.”
If the connected equipment has unbalanced inputs and outputs, make connections as shown
in the figure below:
● Audio output terminal connections
Connect a mixer, power amplifier and other components to this terminal
using two-core shielded wires.
● Audio input terminal microphone connection
Connect a microphone and other sound source equipment to the audio input
terminal using two-core shielded wires.
Connected
Equipment
→ To network
From microphone
or other sound
source equipment
To mixer, power
amplifier, etc
To mixer, power
amplifier, etc
From microphone or other
sound source equipment
