– 39 –
Operation
The following functions can be enabled by way of the function keys:
microphone broadcast, external input broadcast, emergency microphone broadcast,
recording playback broadcast, start and end of pattern activated broadcast, and
monitor selection.
Further, each status indicator displays the status of its corresponding function.
Here, operation examples are explained based on the following function key and
status indicator setting examples.
NOTE:
Microphone broadcasts, external input broadcasts and emergency
microphone broadcasts (explained below) cannot be simultaneously
enabled.
[Setting Example]
Key
Status Indicator
Item Name
Function
Function key 1
Status indicator 1
Broadcasting
destination 1
Broadcasting destination selection
Function key 2
Status indicator 2
Broadcasting
destination 2
Broadcasting destination selection
Function key 4
Status indicator 4
Clear broadcasting
destinations
Cancellation of all selected
broadcasting destinations
Function key 5
Status indicator 5
Pattern activation 1
Start and end of pattern activated
broadcast.
Function key 6
Status indicator 6
Monitor 1
Start and end of monitor playback
Function key 7
Status indicator 7
Monitor 2
Start and end of monitor playback
Function key 8
Status indicator 8
External input
Start and end of external input
broadcast.
-
Status indicator 9
Signal status
Display of signal status
-
Status indicator 10
Peak status
Display of peak status
-
Status indicator 11
Recording status
Display of recording status
Function key 12
Status indicator 12
Recording playback
Playback of recorded announcement
Function key 13
Status indicator 13
Chime
Enabling/disabling of chime output.
Emergency key
Emergency
indicator
Emergency
microphone
Start and end of emergency broadcast.
Talk key
Status indicator 14
Microphone
Start and end of microphone
broadcast (lock type*).
*Lock type:
Key is locked when pressed, allowing announcements from the microphone.
Pressing the key again terminates the announcement.
(Non-lock type):
Announcements can be made only as long as the key is held down. Releasing
the key terminates the announcement.
[Microphone Broadcasts]
1. Select broadcasting destinations.
If Function Keys 1 and 2 are pressed, the broadcasting destination
corresponding to each function key is selected and Status Indicators 1 and 2
light green. To cancel a selection, press its function key again. Cancelling the
selection extinguishes the corresponding status indicator. To deselect all
destinations, press Function Key 4 (clear broadcasting destinations).
2. Set whether to sound a chime or not.
If Function Key 13 (chime) is pressed, Status Indicator 13 lights to indicate that
the chime function is enabled.
3. Start microphone broadcast.
When the Talk key is pressed, Status Indicator 14 (Microphone) lights and
microphone broadcasting can begin. If the chime function has been enabled, a
chime tone (ascending 4-note tone) will also sound. In this event, the chime tone
can be heard from the IP-300RM unit’s built-in speaker.
