– 98 –
Contact Output Pattern Settings
Page Introduction
(1) Add
(2) Delete
(3) Copy
(4) Setting list
(5) Setting input
(6) All
(A) Cancel
(B) Back
(C) Next
Settable Items:
1. Control output pattern name
2. Control output pattern
Setting Method
1) Set some control output into a group.
2) Click "Add" in the setting list on the left side of the page to create a new pattern.
3) Select a pattern name in the list and set it in the right page.
4) Check the control outputs you want to add in the settings input field.
5) Use "Delete" above the setting list to delete the patterns.
6) Select a pattern name and click "copy" to copy the setting of the selected pattern.
7), Click "Next" to enter the “Contact device setup" page after all the settings are
complete
