– 47 –
3. Starting emergency microphone broadcast.
If the ‘Emergency Microphone’ button is clicked, its color changes to indicate
that the broadcast is in progress and the emergency microphone broadcast is
started.
If the chime is enabled, a chime tone (ascending 4-note tone) is broadcast,
which can be heard from the monitor speaker connected to and set for the IP-
3010AF interface.
During chime play, the ‘Chime’ button’s color changes to indicate that the chime
is sounding. If the chime play is finished, the ‘Chime’ button’s color changes to
indicate that the selection is in progress and the emergency microphone
broadcast is started.
4. Terminating emergency microphone broadcast.
Clicking the ‘Emergency Microphone’ button again terminates the emergency
microphone broadcast.
If the chime is enabled, a chime tone (descending 4-note tone) is broadcast,
which can be heard through the monitor speaker connected to and set for the IP-
3010AF interface.
During chime play, the ‘Chime’ button’s color changes to indicate that the chime
is sounding. If the chime play is finished, the ‘Chime’ button’s color changes to
indicate that the selection is in progress.
If the emergency microphone broadcast is terminated, the colors of the
‘Emergency Microphone’ button and the selected broadcasting destination
button return to their original colors and the broadcasting destination is
deselected.
[Pattern Activated Broadcast Operation Example]
1. Starting pattern activated broadcast.
When the ‘Pattern 1’ button is clicked, the pattern activated broadcast begins
and the ‘Pattern 1’ button’s color changes to indicate that broadcast is in
progress.
2. Terminating pattern activated broadcast.
Clicking the ‘Pattern 1’ button again terminates the pattern activated broadcast.
If the busy signal of the playing equipment set for pattern activation is connected
to the IP-3010AF interface’s control input, the pattern activated broadcast ends if
the busy signal goes into off state. If the broadcast is terminated, the ‘Pattern 1’
button’s color returns to its original color.
Note:
Perform the settings of playing equipment by selecting the System Settings →
‘Playing Equipment Settings’ screen. For details, please refer to Chapter 4, System
Settings.
[Monitor Selection Playback Example]
1. Playing back monitor input
If the ‘Monitor 1’ button is clicked, the monitor input is played back through the
monitor speaker connected to and set for the IP-3010AF interface.
During playback, the ‘Monitor 1’ button’s color changes to indicate that
broadcast is in progress.
