– 48 –
2. Terminating monitor input broadcast.
Clicking the ‘Monitor 1’ button again terminate the playback of the monitor input.
If terminated, the ‘Monitor 1’ button’s color returns to its original color.
NOTE:
Monitors are selected alternatively. When switching the monitor input, terminate
the monitor input currently played back first.
[Microphone Broadcast Recording and Playback]
1. Starting microphone broadcasts.
The contents of the microphone broadcast are recorded in the IP-3010AF
interface.
During recording, the remaining time that allows recording is shown on the
recording status bar in a count-down format.
2. Terminating microphone broadcasts.
Recording is finished. A maximum recording duration is one minute. If the
microphone broadcast exceeds this limit, its contents are not recorded.
3. Confirming recorded contents.
Clicking the ‘Playback’ button causes the recorded contents to be played back
from the speaker set for the IP-3010AF interface. During playback of the
recorded contents, the remaining time for playback is shown on the recording
status bar in a count-down format.
4. Finishing confirmation of recorded contents.
Clicking the ‘Stop’ button terminates the playback.
5. Setting the chime tone.
When the ‘Chime’ button is clicked, its color changes to indicate that selection is
in progress and the chime function is enabled.
6. Selecting broadcast destinations and starting recording.
When the ‘Broadcasting Destination 1’ button and the ‘Broadcasting Destination
2’ button are clicked, the destination set to each button is selected and each
button lights in color indicating that broadcast is in progress.
To cancel the selection, click the desired button again. The button’s color returns
to its original display color.
To cancel all selections, click the ‘Clear All Broadcasting Destinations’ button.
Clicking the ‘Playback’ button causes the broadcast of the recorded contents to
be started. If the chime is enabled, a chime tone (ascending 4-note tone) is
broadcast, which can be heard through the speaker set for the IP-3010AF
interface.
During chime play, the ‘Chime’ button’s color changes to indicate that the chime
is sounding. As soon as the chime ends, the broadcast of the recorded contents
is started and the remaining time of the payback is displayed on the recording
status display in a count-down format.
