– 99 –
Contact Device Setup
Perform settings to allow broadcasting while the equipment’s contact input receives
a ‘make’ control signal.
Item
Description
Contact-activate
equipment name
Enter an arbitrary name.
Audio input
Select the equipment’s audio input channel.
Activation contact input
Set the contact inputs to receive a control signal.
Broadcasting destination
checkbox
Select the destinations to which a broadcast is made while the activation
contact input is closed.
Select all broadcasting
destinations
Select all broadcasting destinations.
Contact output destination
checkbox
Select the contact output destination while the activation contact input
is closed.
Select all contact output
destinations
Select all contact output destinations.
Setting Method
Assign the contact-activated equipment to an audio input channel.
1. Select the contact-activated equipment from the Setting List box.
The contact-activated equipment is added to the list when the ‘Add’ button
is clicked.
If the ‘Delete’ button is clicked, the selected playing equipment is deleted
from the list.
2. Set the contact-activated equipment.
Selecting the contact-activated equipment from the Setting List box allows
settings to be performed on the right-side screen.
NOTE:
Broadcasts cannot be made to equipment with channels designated in the Audio
Input settings. Avoid designating such equipment as broadcasting destinations.
Operation Buttons
Cancel:
Reverts to the Home screen without saving any setting.
Next:
Advances to the ‘Microphone Settings’ screen.
Return:
Reverts to the ‘Playing Equipment Settings’ screen.
