– 93 –
Setting Method
Select equipment from the Equipment List box and perform the following settings:
1. Set the audio input channel.
[For IP-3010AF]
Set each of Channels 1 – 4.
[For IP-300RM]
Set each of Channels 3 and 4. (Channels 1 and 2 are not used.)
Microphone input is Channel 3 and external input is Channel 4.
2. Set the audio output channel. (IP-3010AF only)
Set each of Channels 1 – 4.
If the ‘Amplifier’ classification is selected, set ‘Speaker’ as well. ‘Speaker’
can be set for up to 16 pieces per amplifier. Up to 16 speakers can be
freely assigned to any output channel.
The number of entry fields can be increased with the ‘Add’ button. To
decrease the number of entry fields, press the ‘Delete’ button.
For ‘Speaker,’ set the ‘Speaker Name’ and ‘Contact Output Number.’
3. Set contact inputs and outputs.
For each of the 16 contact inputs and outputs, enter the name to be displayed
on all screens.
Use of Initial Values
Enter the contents to be set as initial values in ‘Equipment Name,’ ‘Audio Input
Name,’ ‘Audio Output Name,’ ‘Speaker Name,’ ‘Contact Input Name’ and
‘Contact Output Name’ fields located in the upper part of the screen, then click
the ‘Copy’ button. The initial values are entered in their corresponding fields.
Initial value information can be cleared with the ‘Reset’ button.
It is also possible to directly write initial value information to individual
information fields.
Operation Buttons
Cancel:
Reverts to the Home screen without saving any settings.
Next:
Advances to the ‘Streaming Settings’ screen.
Return:
Reverts to the ‘Equipment List’ screen.
