2. Installation
2.
How to install
2-10
TNU
2-1
Installation environment
Do not put the product into fire to dispose of it.
Doing so may lead the product to burst, generate noxious gas, or cause injury due to bursting.
2-1-1
Installation environment of TNU and TJU
Place it within a control panel that meets the following conditions:
Indoor or outdoor at the ambient temperature of 0 to 40°C (no freezing)
Indoor or outdoor at the ambient humidity of 90% RH or less (no condensation)
Place at an altitude below 1000 m
Place where the product is not exposed to water
Place where no flammable substance exists in the vicinity
Place where a vibration or shock does not transmit to the product
Place where liquid containing impurities such as conductive iron dust, powder such as solid
abrasive, dust, oil mist, cutting oil, water content, salt content, organic solvent, or corrosive/flam-
mable gas is not generated or does not float
2-1-2
Water drop-, oil drop-, and dust-proof
This product does not have a water drop-, oil drop- and dust-proof structure. If the product is to be
used in an environment where it is exposed to water content, oil content, powder or dust, take ap-
propriate measures before using it.
Failure to do so may cause injury, fault or fracture.
In addition, please take note that we take no responsibility for any negative effect of using the prod-
uct without appropriate measures.
Caution –
Flammable
WARNING
2.
How to install
www.thk.ru
тел. +7(499) 703-39-86
