1-5
1. Introduction
2.
Safety precautions
TNU
2-3
Safety precautions
z
While the actuator is operating or
operable, do not enter the working
area of any moving part including
the load.
Doing so may cause you to touch the
moving part and get injured.
z
If the product fails or any abnor-
mality is observed, shut down the
power of the driver controllers
TSC, TLC, and THC.
Such abnormality may cause a mal-
function of actuator, resulting in dam-
age or injury.
z
Do not touch the internal part of
the network unit TNU.
Doing so may cause electric shocks.
z
Do not damage, tuck, or apply ex-
cessive stresses on the cable.
Doing so may cause electric shocks.
z
Do not modify, disassemble, or al-
ter the product.
Doing so may cause injury or fault.
Doing so may cause burns.
Prohibited
Obligatory
Caution -
Electrical shock
Do not
disassemble
z
Do not impact the product and
do avoid rough handling such as
throwing it.
Doing so may cause the fault or dam-
age that leads to injury.
z
Do not frequently switch the power
between on and off.
Doing so may generate heat from the
internal parts of the network unit TNU,
which results in fault or burns.
z
Do not set the speed or accelera-
tion setting that exceeds the actua-
tor specification.
Doing so may cause motor failure,
which leads to unexpected accidents
or damages.
z
If an alarm is generated, remove
the cause, check the safety, de-
activate the alarm, and restart the
operation. (-> P.8-2)
Failure to do so may result in failure,
which leads to injury.
z
Use this product with a combina-
tion that is specified beforehand.
Failure to do so may cause fire or fault.
z
Observe the specified input volt-
age.
Failure to do so may cause fire or fault.
Prohibited
Obligatory
Caution –
Flammable
WARNING
CAUTION
www.thk.ru
тел. +7(499) 703-39-86
