manualshive.com logo in svg

ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Share
Download
ThermoFisher Scientific HERASAFE 2030i Series Operating Instructions Manual Download Page 4

Table of Contents

2 

 |  

50155215

Herasafe 2030i / Maxisafe 2030i

Main Screen (Region R2) ......................................................................................................................... 44
Control Panel (Region R2B)  ..................................................................................................................... 47
Main Navigation Bar (Region R3)  ............................................................................................................. 49

Working Mode............................................................................................................................................. 50
Startup Mode .............................................................................................................................................. 51
Standby Mode ............................................................................................................................................. 51
Cleaning and Loading Mode ......................................................................................................................... 52
Idle Mode.................................................................................................................................................... 53
Sleep Mode................................................................................................................................................. 53
Handling and Control ................................................................................................................................... 54

Using the auxiliary Rocker Switch  ............................................................................................................ 54
Moving the Front Window to the Working Position  .................................................................................... 55
Lowering the Front Window ..................................................................................................................... 56
Switching the Sample Chamber Illumination on and off  ............................................................................. 56
Activating and Deactivating the internal Power Supply Receptacles ............................................................ 56
Activating and deactivating the internal Gas Supply ................................................................................... 57

Logging into a Passcode-protected Unit ........................................................................................................ 57

Logging in .............................................................................................................................................. 58
Logging out ............................................................................................................................................ 59

Running UV Disinfection ............................................................................................................................... 59

Starting the UV Disinfection Cycle  ............................................................................................................ 61
Turning the Fan on and off during UV Disinfection ..................................................................................... 62
Restarting a disrupted UV Disinfection Cycle ............................................................................................. 64

Alarms ........................................................................................................................................................ 65
Silencing and Handling Alarms ..................................................................................................................... 67
Alerts.......................................................................................................................................................... 68
Handling Alerts ............................................................................................................................................ 70
Viewing General Status Information............................................................................................................... 70
Settings ...................................................................................................................................................... 73

Setting UV Disinfection Cycle Time ........................................................................................................... 74
Display Settings ...................................................................................................................................... 77

Activating / Deactivating Sleep Mode ............................................................................................................ 82

Programs ............................................................................................................................................... 86
Alarms and Alerts  ................................................................................................................................... 91
Data Plate  .............................................................................................................................................. 97
Connectivity ........................................................................................................................................... 98
Firmware Update  .................................................................................................................................. 112
Access Control  ..................................................................................................................................... 112
Factory Settings  ................................................................................................................................... 113
Field Certification .................................................................................................................................. 113

Event Log.................................................................................................................................................. 114

Viewing the Event Log ........................................................................................................................... 116
Filtering the Event Log  .......................................................................................................................... 116
Exporting the Event Log  ........................................................................................................................ 117

Chapter 7 Preparation .................................................................................................................................................... 121

Hygiene Preparations for the Sample Chamber ............................................................................................ 121
Preparing the Sample Chamber .................................................................................................................. 121
Response to Failure Messages ................................................................................................................... 122

Summary of Contents for HERASAFE 2030i Series














































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands