ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 128 / 173

| Operation
118
|
50155215 Herasafe 2030i / Maxisafe 2030i
Chapter 6
Proceed as follows to export the event log:
1. Insert a USB drive into the USB port, which is located in a small bay next to the
display window.
2. Tap the “Export Log” button in the “Event Log” screen.
3. If you have not inserted a USB drive yet, the pop-up window shown in Figure 113
appears, asking you to insert a USB drive to export the log to. The window will close
automatically when you insert a valid USB drive, and the export process will start.
Figure 113 “Export log” Screen: Missing USB Drive Alert
a. If you have inserted a USB drive that is not writable or readable, the pop-up
window shown in Figure 114 appears, stating the drive is not readable and
asking you to insert a different USB drive.
If you have inserted a valid USB drive, the export will start immediately. The pop-up
window shown in Figure 114 appears, cautioning you no to remove the USB drive
until the transfer is complete.
Figure 114 “Export in progress” Screen
4. If you wish to exit, you may tap the “Cancel” button or the “X” icon to close this
window and return to the event log.
Please insert a USB stick to export the event log to.
Export log
Cancel
Please do not remove the
USB stick until transfer is
complete.
Export in progress
Cancel